Description
Description
Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal
daily companion to easily check this prerequisite of the safety rule and to support you with
the various requirements in your daily work. It allows voltage testing of an extensive range from 0.5 V to
1,000 V AC or 1,500 V DC. In addition, the voltage tester can be used for continuity testing,
optical rotational field testing, single-pole testing, and automatic polarity detection.
Plus, resistance measurements and frequency measurements can also be conducted.
Thanks to a large digital LCD display with background illumination and an LED display,
the measurement results are immediately readable. An additional signal sound indicates
the current flow during the continuity check. The check can also be conveniently
carried out on sockets with a single hand thanks to the integrated spacer.
In addition, the voltage tester from Wiha has an integrated flashlight function,
providing optimal illumination conditions even in poorly lit work environments.
Simultaneous pressing of both buttons on both handles of the test tips allows
the functional test of the FI protective switch by connecting a load.
According to the measurement categories CAT III up to 1000 V and CAT IV up to 600 V,
the voltage and continuity tester from Wiha offers maximum safety for working on
building installation and directly on the sources of low-voltage installations.
Large LCD display with background illumination,
LED scale and signal sound for easy to read measurement results
An integrated flashlight function ensures optimal illumination
Checking the RCD trigger by means of two load buttons
Specifications
Standards: IEC 61243-3:2014, IP64, CE CAT III 1.000V / CAT IV 600V
Battery: 2x AAA batteries
Voltage V AC min – max: 0,5 – 1000
Voltage V DC min – max: 0,5 – 1500
Contamination level: 2
Remote voltage test: Yes
ATEX approval: No
Photovoltaic-compatible: Yes
eMobility-compatible: No
Integrated flashlight: Yes
FI check: Yes
Display LED and LCD displays
Protection class: IP 64
Rotation field indication: LED L, R
Continuity check: LED and acoustic tone
Operating temperature: -15°C – 50°C
Storage temperature: -20°C – 60°C
Height above sea level: 2000m
Single-pole phase test: 100 – 1,00 V AC (40 – 70 Hz)
Rotation field test: 170 – 7,000 V phase to phase AC 40-70 Hz
Permeability test: Measuring range 0 – 500 kΩ + 50%
LED ELV display: > 50 V AC, > 120 V DC
LCD range: 0,5 V to 1000 V AC, 0,5 V to 1500 V DC
LCD resolution: 0,1 V (< 10 V) and 1 V (> 10 V)
LCD precision: +/- 3%, +/- 3 digits (< 10 V) and +/- 3%, +/- 5 digits (> 10 V)
LCD overflow display: OL
Inherent time: < 0,5s LED and < 1s LCD
Safety circuit: < 3,5 mA (at 1,000 V)
Measuring mode: 30 s ON (operation time), 240 s OFF (recovery time)
Battery consumption: about 80 mA
Humidity: max 85 % RH
Acoustic signal: Yes
Reviews
There are no reviews yet.