Description
The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load
speed of 2,100rpm combining rapid drilling speeds with high levels of torque.
This model has been redesigned with a newly designed motor and gear ratio achieving not only more
power but also increasing the performance in continuous heavy-duty applications.
Not only has the performance on this model been increased but it is also considerably shorter.
At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact
drill in its class and extremely comfortable to use in all applications.
Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws.
Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering)
on the for drilling in masonry up to a maximum 16mm hole diameter.
LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions.
Illuminating the working area for greater visibility during application
High Power Output – This model has been redesigned with a newly designed motor and gear ratio
achieving not only more power but also increasing the performance in continuous heavy-duty applications.
2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low
speed produces high levels of torque to suit high load operation.
All metal gear construction – allow for smoothly transfer of power in high load applications.
While the highly durable materials ensure this tool has unmatched durability,
and will continue to perform in years to come.
XPT – Extreme Protection Technology protects the tool against dust & moisture even in
the harshest jobsite conditions, increasing durability
Specifications
Max. drilling capacities in wood:
Auger bit: 50mm
Self-feeding bit: 76mm
Hole saw: 152mm
Max. drilling capacities in steel: 13mm
Max. drilling capacities in masonry: 16mm
No load speed:
Hi: 0 – 2,100rpm
Lo: 0 – 550rpm
Impact rate:
Hi: 0 – 31,500ipm
Lo: 0 – 8,250ipm
Max. peak torque: 141Nm
Max. tightening torque:
Hard: 130Nm
Soft: 65Nm
MAKITA 18V Brushless 1/2inch Impact Wrench Friction Ring Skin DTW300Z
Variable speed trigger & Quick Trigger mode which engages immediate full speed
Forward & Reverse Automatic Stop, with 6 modes for customised applications
High power in a compact design with 330Nm maximum fastening torque
4 stages of impact force enables the user to set the appropriate torque for each application
Extreme Protection Technology (XPT) provides enhanced protection against dust and moisture
Specifications
Drive Shank: 12.7mm (1/2”) Square
Impact Rate
Max: 0 – 4,000ipm
High: 0 – 3,400ipm
Med: 0 – 2,600ipm, Soft: 1,800ipm
Max. capacities high tensile bolt: M10 – M16
Max. capacities standard bolt: M10 – M20
Max. fastening torque
Max: 330Nm
Hard: 210Nm
Medium: 160Nm
Soft: 100Nm
No Load Speed
Max: 0 – 3,200rpm
High: 0 – 2,600rpm
Medium: 0 – 1,800rpm
Soft: 0 – 1,000rpm
Nut busting torque: 580Nm
Voltage 18V
MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850BL
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Up to 33% more run time per charge compared to BL1830
Fast 40 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation,
even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
MAKITA 18V Lithium-Ion Battery Charger DC18RC
Fast charging – charges Li-Ion 3.0Ah battery in only22 minutes and Li-Ion Compact series batteries in only 15 mins
Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
Forced air cooling fan – cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Reviews
There are no reviews yet.