Fukuda FRD800R Digital Laser Receiver 800m w/Staff Clamp (for FRE102 & all Red Rotary Lasers)

Description

Special Features:
■ All-round rubber edging
■ IP55 protection
■ Magnetic top & side surfaces
■ Front and back LCD with backlight
■ LED ‘trafic light’ UP/DOWN indication
■ Zero-set function
■ Horizontal and vertical level vials

FRD800MM Applications:
The FRD800MM Receiver is a precision instrument for digitally displaying
the variation from datum of the rotary laser beam.
However there is a limitation of only ±45mm height variation displayed.
This limits the measurements of horizontal surfaces at a short range, eg flooring, driveways,
drainage and brickwork when the levelling range is within ±45mm.
It is also recommended for overhead lighting, suspended ceilings, ducting and pipework, etc.

Important:
Please note that this is a rotary laser receiver and will not work with cross & multi line lasers!

LLS Laser Levelling Staff – Alternative:
The LLS Laser Levelling Staff with a Receiver, (as included with every Spot-On Rotary Laser Set)
already provides a direct height variation reading of ±500mm from datum.
This allows for use at much longer distances, albeit at ground level only, with the same accuracy.
(Please refer to the LLS with Accessories below).
The Laser Levelling Staff allows height differences to be measured directly without any calculation!

Technical Specification:
Fukuda FRD800R Digital Laser Receiver 800m w/Staff Clamp (for FRE102 & all Red Rotary Lasers)
Detecting range 800m diameter (subject to ambient light conditions and laser range)
Detecting sensor range 125mm
Readable display range ±45mm
Height display mm (default), cm, ins, ins fraction & %
Accuracy/sensitivity 1mm high/5mm medium/10mm low
Horizontal & vertical level vial accuracy 30″ / 2mm/10m
Power supply 4 AA 1.5v alkaline batteries (included)
Operating time 40hrs (w/out backlight)
Protection 1P55 rating
Spot-On Ref No FRD800R