Description
Description
The Fluke 773 milliamp clamp meter is accurate and versatile. It saves time and money
by measuring 4–20 mA signals five times faster than with traditional DMMs, and without breaking the loop.
That means you can troubleshoot a live device without having to power down and possibly miss
something going on in the process. The 773 is ideal for troubleshooting transmitters, valves,
and programmable logic controllers (PLCs) found in process plants. It measures low level dc current
and correlates process indication with a real physical value. And it measures up to 99.0 mA non-contact,
including 10 to 50 mA signals in older control systems.
Loop calibrator that measures 4 to 20 mA signals without breaking the loop
Features best in class 0.2% accuracy
Sources 4 to 20 mA signals for testing control system I/O or I/Ps
Delivers 0.01 mA resolution and sensitivity
Features a detachable clamp with extension cable for measurements in tight locations
Extends battery life with auto-off and backlight timeout
Captures and displays changing measurements with Hold function
Measures 4 to 20 mA signals with in-circuit measurement
Measures DC voltage to verify 24V power supplies or voltage I/O signals
Specifications:
mA measurement (measured by clamp) Resolution / range: 0 to 20.99 mA
Accuracy: 0.2% + 5 counts
mA measurement (measured by clamp) Resolution / range: 21.0mA to 100.0 mA
Accuracy: 1% + 5 counts
mA measurement (measured in series with test jacks):
Resolution / range: 0 to 24.00 mA
Accuracy: 0.2% + 2 counts
mA source (maximum mA drive: 24 mA into 1,000 ohms):
Resolution / range: 0 to 24.00 mA
Accuracy: 0.2% + 2 counts
mA simulate (maximum voltage 50 V dc):
Resolution / range: 0 to 24.00 mA
Accuracy: 0.2% + 2 counts
Voltage source (2 mA maximum drive current):
Resolution / range: 0 to 10.00 V DC
Accuracy: 0.2% + 2 counts
Voltage measure:
Resolution / range: 0 to 30.00 V DC
Accuracy: 0.2% + 2 counts
Diameter of measurable conductor: 0.177″ or 4.5 mm max
Operating temperature: -10 to 50ºC
Storage temperature: -25 to 60ºC
Operating humidity:
< 90% @ <30ºC,
< 75% @ 30 to 55ºC
Operating altitude: 0 to 2000 m
IP rating: IP 40
Vibration: Random 2 g, 5 to 500 Hz
Shock: 1 meter drop test (except the jaw)
EMI/RFI: Meets EN61326-1
Temperature coefficient: 0.01% ºC (< 18ºC or > 28ºC)
Battery type: 4 x AA 1.5 V Alkaline, IEC LR6,
Battery life: 12 hours in mA source into 500 ohms
Warranty: 3 Years Warranty for Electronics Covered By Fluke ;
12 Months Warranty for Cable and Clamp Assembly Covered By Fluke
Includes:
Four AA alkaline batteries (installed)
Soft carrying case
TL75 test leads
AC 72 detachable clip
TL 940 mini hook test leads
Instruction sheet
Hanging tool with hook and loop strap
Fluke 773 Milliamp Process Clamp Meter
Reviews
There are no reviews yet.