Description
The original SmartTool Pro 93969 is a professional digital angle sensor module
that can be used as pocket inclinometer, protractor or angle finder.
Available ex stock London.
Special Features
Updated model incorporating many special practical features:
1. Pro Digital Angle Sensor Module displays inclinations in degrees°,
Slope in % and Pitch in mm/m. High accuracy display to 0.05° at level and plumb, and to 0.1° at all other angles.
2. Directional Beep the listen and level feature guides you to your angle so
you don’t have to see the level. The beep rate increases as angle is approached
and is steady when angle achieved. Changes tone when gone too far.
Perfect for ‘blind’ levelling and inclination settings.
3. Alternate Zero mode to set any angle as the 0° reference.
The display shows “Alt” with a dot flashing above the decimal point.
4. Angle Copy mode is activated by pressing the Hold/Copy button and then
the Listen & Level button. The Copy angle will be frozen on the display.
The beep will sound when the unit is returned to this exact angle.
Patented Sensor
The SmartTool Pro Digital Inclinometer module incorporates the patented
liquid capacitive disc sensor manufactured in their US factory’s Class 1000 cleanroom.
This sensor has a unique microprocessor controlled “auto-calibration” feature also thermal compensation circuitry.
Other MEMS accelerometer sensor based levels are susceptible to temperature changes that result in resolution errors.
Design Technology
For information on the SmartTool’s technical design theory, please click here.
Competitive Accuracy
For information on the SmartTool’s competitive accuracy, please click here.
Video
To see how the SmartTool works, please click here.
Calibration
To see how to recalibrate the SmartTool, please click here.
Please click on Digital Protractors to see our other digital angle measuring instruments.
Accessories
The SmartTool can be locked into the Magnetic Base or End Bracket
for attaching to steel surfaces for hands-free alignment.
The SmartTool Case is now included in the price. This durable case protects
the SmartTool Digital Inclinometer Module and incorporates an internal
pocket for the instruction manual and has a metal belt clip.
Main Features: SmartTool Pro Digital Inclinometer 0.05° AngleFinder
Angle Sensor digital inclinometer module.
High accuracy display at level and plumb.
Angle displayed in degrees (°), slope (%) or pitch (mm/m rise over run).
Very high stability readings throughout temperature range.
Acoustic signal at horizontal and vertical.
LC digital 3/4-figure numeric display with battery state indicator.
Display can be read even when level is inverted for overhead measurements.
Alternate zero feature to set any angle at 0°.
Hold & copy mode to freeze reading.
On-site owner recalibration to factory setting.
Auto shut-off after 6 minutes.
High impact resistant ABS polymer case.
Sealed against dirt and water penetration.
Complete with battery, case and instructions.
Technical Specification: SmartTool Pro Digital Inclinometer 0.05° AngleFinder
Measuring Range 4 x 90° (=360°)
Resolution/Display 0.05° at 0° & 90°
0.1° at all other angles
Angle accuracy ±0.05° at 0° & 90°
±0.2° at all other angles
Slope accuracy ±0.1%
Pitch accuracy 1mm/m
Accoustic signal 0° and 90°
Operating temperature -10°C to +50°C
Power supply 9v PP3 battery included
Duration 400 hours
Auto shut-off 6 minutes
Dimensions 170 x 54 x 36mm
Weight 0.4kg (includes battery & case)
MD Part No 93969
Reviews
There are no reviews yet.