Description

Description
The T5-1000 is a versatile troubleshooting tool to carry to every job site.
Use it to check voltage, continuity, and current with one compact tool.
Just select volts, ohms, or current and the tester does the rest.

Automatically measure AC and DC voltage up to 1000 V with precise digital resolution
Auto-selects between AC and DC voltage
Suitable for industrial applications
Measure current up to 100 A without breaking the circuit with OpenJaw™ design
OpenJaw™ design allows for fast and easy current measurement
Measure current more safely without metallic contact
Troubleshoot resistance problems up to 1000 Ω
Measure resistance when troubleshooting motors, HVAC systems or electrical systems
Built-in continuity beeper provides fast and easy go/no-go tests
Work in tight spaces with detachable Slim Reach probe tips
Features a compact design with handy probe storage, easily fits in one hand
The test lead slot in the back makes the meter an “extended handle” for the probe,
leaving the other hand free to place the second lead
Test leads accept Fluke accessory test clips

Key safety features
Protected to EN61010-1 CAT IV 600 V / CAT III 1000 V rating
Integrated protection circuit allows it to
stay connected to a voltage source longer than a solenoid tester
UL and CSA approved
Additional product features
Withstands a 10 ft. (3 m) drop
Offers Auto-off mode to conserve battery life
Fits into an optional holster that attaches to a belt and neatly stows test leads

Specifications:
Jaw opening: 12.9 mm (0.5 in)
Max wire size: 1/0 THHN Cable
Current range AC RMS: 0 to 100.0 A
Accuracy AC current (50/60 Hz): 3% ± 3 counts
AC response: Averaging
Voltage range: AC/DC: 0 to 1000 V
Voltage accuracy:
AC: 1.5% ± 2 counts
DC: 1% ± 1 count
Resistance range: 0 to 1000 Ω
Continuity beeper threshold On: at < 25 Ω, off at > 400 Ω
Volts indicator LED threshold: Guaranteed on by 30 V AC
Environmental Specifications:
Operating temperature: -10°C to 50°C
Storage temperature: -30°C to 60°C
Humidity (without condensation):
0% to 95% (5°C to 30°C);
0% to 75% (30°C to 40°C);
0% to 45% (40°C to 50°C)
Dust/water resistance: Yes
Operating altitude: 2000 meters max
Temperature coefficient:
0.1 x (specified accuracy)/°C (< 18°C or> 28°C)

Safety Specifications:
Measurement Category: IEC 61010-2-032,
IEC61010-2-033: CAT IV 600 V / CAT III 1000 V, 100 A ac
Agency approvals: CSA, TUV
Maximum voltage: 1000 V between any terminal and earth ground
Mechanical and General Specifications:
Battery life: 200-hour zinc chloride, 400-hour alkaline
Battery type: 2 x AA
Low battery indicator: Yes
Current sensor opening: 12.9 mm